Long warranty
The implementation of the industry's high standard of warranty: battery five years 12,000 hours, really let customers have no worries.
High and low temperature resistance
Lithium battery through high strength, high/low temperature strict test, can maintain good performance at -40° low temperature to 60° high temperature, the vehicle can adapt to different temperature operating conditions.
Strong drive
Equipped with high-power drive motor and oil pump motor, driving speed is fast, lifting speed is stable; The vehicle power efficient output, strong power, can be completely comparable to the same tonnage internal combustion forklift, far better than lead-acid battery forklift.
Stable and reliable
The whole vehicle has been tested for reliability, stability, safety and comfort to ensure that each car achieves the best use state, reliable and stable, and quality assurance.
Battery, BMS and charger technology integration, the battery built-in BYD self-developed BMS power management system with balancing function, real-time monitoring of battery temperature, voltage and charge and discharge current, to ensure that the battery is always in normal working condition, effectively delay battery life.
Green environmental protection
high efficiency, low consumption
high efficiency, high safety, long life
adapt to high and low temperature environment
Manufacturer | BYD | ||
Product model | CPD30 | CPD35 | |
Actuate | Electric | ||
Load capacity | kg | 3000 | 3500 |
Load center | mm | 500 | 500 |
Total weight (including battery) | kg | 5000 | 5600 |
Wheel class | SE | SE | |
Minimum height of gantry | mm | 2105 | 2105 |
Free lifting height | mm | 130 | 130 |
Lifting height | mm | 3000 | 3000 |
Top guard height | mm | 2215 | 2215 |
Total length | mm | 3670 | 3670 |
Full length (without fork) | mm | 2600 | 2600 |
Overall width | mm | 1360 | 1360 |
Fork size | mm | 45/125/1070 | 50/125/1070 |
Minimum ground height at the gantry | mm | 110 | 110 |
Minimum ground height at frame | mm | 130 | 130 |
Minimum turning radius | mm | 2270 | 2270 |
Travel speed, load/no load | Km/h | 15/16 | 15/16 |
Lifting speed, load/no load | mm/s | 380/450 | 380/450 |
Drop speed, load/no load | mm/s | 550/450 | 550/450 |
Maximum climbing capacity,S2=5min, load/no load | % | 15/20 | 15/20 |
Electronic control type | AC | AC | |
Driver's noise | dB(A) | ≤75 | ≤75 |
Traction connection system | PIN | PIN |
It can be said that this is one of the most outstanding advantages of an electric forklift compared to an internal combustion engine forklift. While forklifts which use oil, gas, gasoline… have to burn fuel to generate energy, creating a lot of noise, the electric forklift uses the energy from the battery to operate, creating much smoother operation.
When comparing electricity and other fuels such as gas, gasoline, diesel, etc., it is clear that electricity is common, easy to find and has a higher availability.
On the other hand, fuels such as liquefied petroleum gas, diesel, gasoline… are difficult to store in factories and warehouses because it is risky and easily impacts safety .
In addition to the actual amount of gas, gasoline, diesel, etc that have been used. It is converted into exhaust fumes released into the environment. It can be understood that businesses cannot use 100% of the fuel for forklifts with internal combustion engines.
Meanwhile, electric forklifts are very fuel efficient and produce almost no emissions. The cost of electricity is also cheaper than fuels.
Maintenance costs are often related to the complexity of the engine construction. In order to meet the large load capacity, internal combustion engine forklifts often require a more bulky and detailed engine. While electric forklifts are optimal in the capacity and lifting height range. Therefore, the mechanical structure is also simpler which leads to the maintenance costs and methods are also less expensive.
The energy in the electric forklift is generated based on the alternating current mechanism in the battery. Almost no exhaust fumes appear during truck operation. Thanks to this advantage, electric forklifts are chosen in many fields such as food, pharmaceuticals, etc. As well as in closed, tight warehouses for operator and goods safety.
BYD forklift was established in 2009
The total investment of the project is 515 million yuan, covering an area of about 700,000 yuan, mainly responsible for the production of BYD electric forklift series, of which the current development and production of electric forklift series including electric balance forklift series, electric storage forklift series, electric tractor series.
Byd forklift has a complete forklift vehicle production line, including 4 machining and welding lines, 1 painting line and 3 final assembly lines, achieving an annual production capacity of 30,000 units.
At the same time, the factory has a professional inspection line and perfect quality system, and through the 1S09001 certification, for the quality of each forklift escort, to provide customers with satisfactory quality and quality service.
Submitted successfully
We will contact you as soon as possible
Submitted successfully
We will contact you as soon as possible